f28027

How do I flash my Piccolo (F28035)?

Can I flash directly from VisSim?

dc buck converter won't work. Help!

I'm using your dc-2buck-f2808-d diagram as a starting point to control my buck converter. I've taken the output voltage and wired it to ADCINB0 through a 1K resistor (I know it should be buffered but I want to do a quick test). I'm assuming that c0: is the reference? So if I set that to .5 my reference would be full scale input/2? 1.5V? But when I move the slider to a non zero value, the regulator goes from 0V to full on. What am I doing wrong?

Can you explain the F280x PWM module? It's somewhat overwhelming when you first look at it.

There are 2 inputs to the VisSim ePWM block and when you right click there are many many options. Are there any other blocks or items that go with or belong with the epwm module or is everything self contained. I'm trying to sync a few modules and play with timing.

I downloaded the 100+ pages of TI epwm reference (SPRU791F) so this will keep me busy. Any recommendations or tips regarding this module? Thanks

Syndicate content